It had been dropped - directly onto its knobs. The two halves of the potentiometers had come apart.
Bought "for parts" for USD$26.
Really easy mechanical fix. Put the two halves back together and reset the metal "fingers" holding them together.
I like it. A lot. It will likely replace the MIJ SD-1 on my board.
.
Picked up a broken Maxon OD808 today
Re: Picked up a broken Maxon OD808 today
That’s an excellent find Laurie ! Great to hear it’s working again. Those do sound good.
- laurie
- Posts: 1393
- Joined: Fri Aug 17, 2018 2:07 am
- Location: Canada
- SBZ: Multi Platinum
- Bossarea: Multi Platinum
Re: Picked up a broken Maxon OD808 today
It must have been a very specific hit on all three knobs at once because all three potentiometers had the same fault. Either that or someone hit each knob with a hammer...
Irrespective of the cause, the fix was easy and did not require any parts. I've wrapped a cable tie around each potentiometer body so that the clips can't spring open again in the future.
.
Irrespective of the cause, the fix was easy and did not require any parts. I've wrapped a cable tie around each potentiometer body so that the clips can't spring open again in the future.
.
Last edited by laurie on Sun Oct 23, 2022 12:12 pm, edited 1 time in total.
- laurie
- Posts: 1393
- Joined: Fri Aug 17, 2018 2:07 am
- Location: Canada
- SBZ: Multi Platinum
- Bossarea: Multi Platinum
Re: Picked up a broken Maxon OD808 today
And yes, it has replaced the MIJ SD-1 on my board.
- fuzzbuzzfuzz
- Posts: 421
- Joined: Thu Aug 23, 2018 11:25 am
Re: Picked up a broken Maxon OD808 today
Nice fix! And one of the best TS type pedals, very soft edges and less muddy than the stock TS-9 for example. Enjoy!