Boss PH-2 problem
Boss PH-2 problem
The issue is the oscillating whistling noise when it's bypassed, and when it's turned on, the oscillation becomes louder, and the effect level is somehow at 30%, even when the speed and res knobs are at max.
I hope you guys can shed some light to this pedal's issue. Thanks!
Here's the video to show what I mean. (sorry for the language on the vid, it's in Filipino, but the explanation is on top)
https://www.youtube.com/watch?v=jmyW4sY1kUk
I hope you guys can shed some light to this pedal's issue. Thanks!
Here's the video to show what I mean. (sorry for the language on the vid, it's in Filipino, but the explanation is on top)
https://www.youtube.com/watch?v=jmyW4sY1kUk
- Pepe
- Posts: 1682
- Joined: Thu Aug 16, 2018 2:19 pm
- Location: Germany
- SBZ: Multi Platinum
- Bossarea: Double Platinum
- Contact:
Re: Boss PH-2 problem
Welcome! I'm sure that Laurie might be able to help you investigate what's wrong with your phaser.
- laurie
- Posts: 1644
- Joined: Fri Aug 17, 2018 2:07 am
- Location: Canada
- SBZ: Multi Platinum
- Bossarea: Multi Platinum
Re: Boss PH-2 problem
This is often caused by the power supply. What are you using to power it? Does it make the noise with a new battery?
- Pepe
- Posts: 1682
- Joined: Thu Aug 16, 2018 2:19 pm
- Location: Germany
- SBZ: Multi Platinum
- Bossarea: Double Platinum
- Contact:
Re: Boss PH-2 problem
Is it possibly an old ACA model? What does the label on the back say which power supply is recommended?
This is the label from a PH-2 ACA model:
As Laurie suggested, please have a try with a fresh 9V battery.
This is the label from a PH-2 ACA model:
As Laurie suggested, please have a try with a fresh 9V battery.