Hi forum friends!
I have a couple of Boss Microracks in my synth effects setup, and am looking to put al those effects in a 19 inch rack for convenience, so I can put my screen on top.
Does anyone have any experience with rack mounting adapters for this series? Would something generic like this work?
https://www.thomann.de/be/thon_rackwanne_1he.htm
Thanks a bunch!
Joske Turbo
Boss Microrack Rack Adapter
- Joske Turbo
- Posts: 72
- Joined: Fri Aug 17, 2018 1:33 pm
- SBZ: Silver
- Bossarea: Gold
- Pepe
- Posts: 1682
- Joined: Thu Aug 16, 2018 2:19 pm
- Location: Germany
- SBZ: Multi Platinum
- Bossarea: Double Platinum
- Contact:
Re: Boss Microrack Rack Adapter
This could work, but the Micro Rack units are a lot shorter. Sadly the original Roland RAD-50 are not in production anymore and the few ones for sale out there have massively increased in price.
- Joske Turbo
- Posts: 72
- Joined: Fri Aug 17, 2018 1:33 pm
- SBZ: Silver
- Bossarea: Gold
Re: Boss Microrack Rack Adapter
Yes, I know they are shorter, not really a problem for me as the rack will be deep enough and it won't be visible anyway.
Prices for the RAD-50 are indeed ridiculous for such a thing, guess I'll have to take the plunge and see if this fits.
I'll report back once I know!
![Smile :)](./images/smilies/icon_e_smile.gif)
- laurie
- Posts: 1644
- Joined: Fri Aug 17, 2018 2:07 am
- Location: Canada
- SBZ: Multi Platinum
- Bossarea: Multi Platinum
Re: Boss Microrack Rack Adapter
The generic one should work. Might need to drill holes in the shelf to match the screw holes on the bottom of the Micro Rack units.
- Joske Turbo
- Posts: 72
- Joined: Fri Aug 17, 2018 1:33 pm
- SBZ: Silver
- Bossarea: Gold
- Joske Turbo
- Posts: 72
- Joined: Fri Aug 17, 2018 1:33 pm
- SBZ: Silver
- Bossarea: Gold
Re: Boss Microrack Rack Adapter
FYI: the generic rackshelves work like a charm, there's a hole to mount the Microracks without extra drilling.
Small question: does anyone here happen to know if there is space saved inside for the screw that mounts it to the shelf?
Just to be sure that I don't touch any of the circuit with the screw. Thanks!
Small question: does anyone here happen to know if there is space saved inside for the screw that mounts it to the shelf?
Just to be sure that I don't touch any of the circuit with the screw. Thanks!
- Pepe
- Posts: 1682
- Joined: Thu Aug 16, 2018 2:19 pm
- Location: Germany
- SBZ: Multi Platinum
- Bossarea: Double Platinum
- Contact:
Re: Boss Microrack Rack Adapter
There are a few millimetres of space inside, but I don't know how much there is in each Micro Rack unit. I would recommend to open the chassis with the four screws (two on each side) and to look inside. In general I would use very short screws to fit the units in the rack shelve, if you don't have the original screw.