BossAreaForum

AB-2 - Chain way
Hello, I wanna ask if it is possible. I think about to set the ab-2 in the follow way, and I want to know is it OK for the ab-2 or are there some issues for ab-2.

The way:
Guitar – Tuner – FX1 – FX2 -- …...FX10 – AB-2 (one IN – split to two OUTs) – each OUT send to a different amp. I use two amps.

Welcome to the forum!

Yes, you can use the AB-2 and it will switch between the two amplifiers every time you press the switch. I don't know of any issues, since it is a simple switch. It should work just like you describe it. Here is the manual for the AB-2 and "Example 2" shows exactly what you intend to do with it:
https://static.roland.com/assets/media/pdf/AB-2_OM.pdf

Thanks for your help.

No problem! You seem to have a nice collection there if you use ten pedals in a row.

Ich bin noch dabei das Board auf zu bauen, aber mit CP-1X und NS-2 kommen sicher zehn pedale zusammen. Der Großteil sind Boss Pedale, weil Boss ist für mich der Mercedes unter den Pedalen.

Ah, noch ein Deutscher hier! Hallo! Falls du irgendwelche pedaltechnische oder sonstige Fragen hast, scheue dich nicht, zu fragen. Allerdings (wenn es geht) auf Englisch, denn das verstehen hier dann alle.


[end of German chit-chat]

Ok, thanks for your offer. I will remember me.