Fuzz and Octaver with SYB-3

User avatar
Kulten
Posts: 91
Joined: Sat Aug 18, 2018 8:45 pm
SBZ: Copper

Fuzz and Octaver with SYB-3

Post by Kulten » Thu Oct 04, 2018 6:41 pm

SYB is not only a great synthesizer, it also have distorted sounds, wah, and low octave synth sound to create an octaver effect.

I have two SYB, one is dedicated to Fuzz and Octaver, with one setting, just have to change modes : mode 8 = Fuzz, mode 4 = Octaver. So with only one setting I have two effects in one pedal and I can quickly change.

Never tried with another bass than mine, however. Can you test it and tell if it works for you with a guitar or a bass ?

(edit : don't know why the pictures are doubled in the post, sorry...)
Attachments
IMG_2707.JPG
IMG_2707.JPG (101 KiB) Viewed 11395 times
IMG_2706.JPG
IMG_2706.JPG (104.46 KiB) Viewed 11395 times
IMG_2707.JPG
IMG_2707.JPG (101 KiB) Viewed 11396 times
IMG_2706.JPG
IMG_2706.JPG (104.46 KiB) Viewed 11396 times
Last edited by Kulten on Tue Jul 28, 2020 4:39 pm, edited 5 times in total.

User avatar
Pepe
Posts: 1681
Joined: Thu Aug 16, 2018 2:19 pm
Location: Germany
SBZ: Multi Platinum
Bossarea: Double Platinum
Contact:

Re: Fuzz and Octaver with SYB-3

Post by Pepe » Thu Oct 04, 2018 7:08 pm

I might try that in the next days. Send me a PM in the case that I should forget it. So much to do at the moment ...
Pepe at YouTube and Instagram

User avatar
chromandre
Posts: 215
Joined: Sat Aug 25, 2018 3:15 am

Re: Fuzz and Octaver with SYB-3

Post by chromandre » Thu Oct 04, 2018 9:24 pm

yeah I will report back too I remember I have a setting that pretty much works for all the modes cross the board but then I noticed the filter in the fuzz+autowah responds differently than the filter in the autowah only!

User avatar
Pepe
Posts: 1681
Joined: Thu Aug 16, 2018 2:19 pm
Location: Germany
SBZ: Multi Platinum
Bossarea: Double Platinum
Contact:

Re: Fuzz and Octaver with SYB-3

Post by Pepe » Thu Oct 04, 2018 10:03 pm

Using the wah and waveshaper modes from time to time only can be tricky. I tend to use the standard synth sounds. The waveshaper modes behave so differently. I always get some controls mixed up at the beginning. ;)
Pepe at YouTube and Instagram

User avatar
fuzzbuzzfuzz
Posts: 493
Joined: Thu Aug 23, 2018 11:25 am

Re: Fuzz and Octaver with SYB-3

Post by fuzzbuzzfuzz » Fri Oct 05, 2018 1:28 am

SYB-3 has been on my radar for a while but I ahd never looked closely enough to see the inclusion of an octaver part, good news! ;)

I assume its mono-phonic?

I'll pick one up ASAP :D

zombiwoof
Posts: 17
Joined: Sun Aug 19, 2018 2:45 pm
SBZ: Silver

Re: Fuzz and Octaver with SYB-3

Post by zombiwoof » Fri Oct 05, 2018 4:59 am

fuzzbuzzfuzz wrote:
Fri Oct 05, 2018 1:28 am
SYB-3 has been on my radar for a while but I ahd never looked closely enough to see the inclusion of an octaver part, good news! ;)

I assume its mono-phonic?

I'll pick one up ASAP :D
It has two outputs, A (Mono) and B so I would assume stereo out is possible using both outputs.
Al

User avatar
Pepe
Posts: 1681
Joined: Thu Aug 16, 2018 2:19 pm
Location: Germany
SBZ: Multi Platinum
Bossarea: Double Platinum
Contact:

Re: Fuzz and Octaver with SYB-3

Post by Pepe » Fri Oct 05, 2018 6:30 am

The modes 1 to 7 are monophonic and you have to play very accurate or it will mess up your sound (very much like an analogue octaver). The T Wah and Wave Shape modes can be played by any instrument and with as many tones at once.
Pepe at YouTube and Instagram

User avatar
chromandre
Posts: 215
Joined: Sat Aug 25, 2018 3:15 am

Re: Fuzz and Octaver with SYB-3

Post by chromandre » Fri Oct 05, 2018 3:18 pm

Pepe wrote:
Fri Oct 05, 2018 6:30 am
The modes 1 to 7 are monophonic and you have to play very accurate or it will mess up your sound (very much like an analogue octaver). The T Wah and Wave Shape modes can be played by any instrument and with as many tones at once.
just wanted to add that the synth tracking is very entertaining if you run a drum machine through it

User avatar
Kulten
Posts: 91
Joined: Sat Aug 18, 2018 8:45 pm
SBZ: Copper

Re: Fuzz and Octaver with SYB-3

Post by Kulten » Mon Oct 08, 2018 3:37 am

I do run a drum machine through it, since I have it (1996) and play electronic music with that set up.

User avatar
Pepe
Posts: 1681
Joined: Thu Aug 16, 2018 2:19 pm
Location: Germany
SBZ: Multi Platinum
Bossarea: Double Platinum
Contact:

Re: Fuzz and Octaver with SYB-3

Post by Pepe » Tue Oct 09, 2018 3:41 pm

I just tested your suggested modes. The octaver mode (4) works great with all my electric guitars (Fender Stratocaster, Dean Vendetta with humbuckers, Squier Jazz Bass). The fuzz mode (8) drops off very quickly. I got better results with higher SENS values. But overall it works just like you said.
Pepe at YouTube and Instagram

Post Reply