Hi guys,
New to the forum here.
I have a few BOSS pedals and love them of course.
I do have an old OD-1 that has seen better days.
Essentially its functional but the battery lead has been pulled out for some reason.
I have the lead but I'm not positive exactly where it gets soldered to.
Any help would be great.
OLD OD-1 needs battery lead soldered in
- laurie
- Posts: 1643
- Joined: Fri Aug 17, 2018 2:07 am
- Location: Canada
- SBZ: Multi Platinum
- Bossarea: Multi Platinum
Re: OLD OD-1 needs battery lead soldered in
If you are OK reading schematics, this schematic is for the 4558 version. Which version do you have?
https://www.hobby-hour.com/electronics/ ... rdrive.php
https://www.hobby-hour.com/electronics/ ... rdrive.php
Re: OLD OD-1 needs battery lead soldered in
Firstly, I apologize for not responding sooner. I didn't receive an email saying there was a response.
How would I figure out which version of pedal I have?
I know it was purchased late 80's
And now looking at it it is an SD-1
Sorry for the lack of brains on my end.
I checked out the schematic and I'm not sure if I see where the battery leads go
Drew
How would I figure out which version of pedal I have?
I know it was purchased late 80's
And now looking at it it is an SD-1
Sorry for the lack of brains on my end.
I checked out the schematic and I'm not sure if I see where the battery leads go
Drew
- Pepe
- Posts: 1681
- Joined: Thu Aug 16, 2018 2:19 pm
- Location: Germany
- SBZ: Multi Platinum
- Bossarea: Double Platinum
- Contact:
Re: OLD OD-1 needs battery lead soldered in
This is a picture from harmonycentral. Maybe this helps you a bit:
And here's another site with SD-1 modifications and rather big internal pictures of the SD-1:
http://www.tonegeek.com/musicgear/pedal ... e-mods.php
And here's another site with SD-1 modifications and rather big internal pictures of the SD-1:
http://www.tonegeek.com/musicgear/pedal ... e-mods.php