Thoughts on a good compressor??

Discuss all non-Boss pedals here!
User avatar
laurie
Posts: 1632
Joined: Fri Aug 17, 2018 2:07 am
Location: Canada
SBZ: Multi Platinum
Bossarea: Multi Platinum

Re: Thoughts on a good compressor??

Post by laurie » Tue Mar 14, 2023 1:05 am

On the site where the base circuit came from (http://www.valvewizard.co.uk/engineersthumb2.html) the original designer landed on "ratio" and "level" as the two controls, so I'd put one of the "threshold" and "attack" controls inside. This would leave 8 knobs. Good grief!

The reason I'm kinda hung-up on evolving this particular design is the engineering of it - it will be ultra low noise, unlike any of the optical compressors or Dyna Comp clones.
Last edited by laurie on Tue Mar 14, 2023 4:18 pm, edited 1 time in total.

User avatar
Pepe
Posts: 1671
Joined: Thu Aug 16, 2018 2:19 pm
Location: Germany
SBZ: Multi Platinum
Bossarea: Double Platinum
Contact:

Re: Thoughts on a good compressor??

Post by Pepe » Tue Mar 14, 2023 8:33 am

"Ultra low noise" sounds very promising and that would be a reason why I should buy one. 8-)
Pepe at YouTube and Instagram

User avatar
laurie
Posts: 1632
Joined: Fri Aug 17, 2018 2:07 am
Location: Canada
SBZ: Multi Platinum
Bossarea: Multi Platinum

Re: Thoughts on a good compressor??

Post by laurie » Tue Mar 14, 2023 4:11 pm

I don't yet know if this is even feasible, but the initial thinking is something like this:
.
.
32Press mockup v1.jpg
32Press mockup v1.jpg (82.63 KiB) Viewed 3135 times

User avatar
Pepe
Posts: 1671
Joined: Thu Aug 16, 2018 2:19 pm
Location: Germany
SBZ: Multi Platinum
Bossarea: Double Platinum
Contact:

Re: Thoughts on a good compressor??

Post by Pepe » Tue Mar 14, 2023 4:18 pm

Oh, I like it!
Pepe at YouTube and Instagram

User avatar
The_Doc
Posts: 464
Joined: Fri Aug 17, 2018 6:02 am
SBZ: Gold
Bossarea: Gold

Re: Thoughts on a good compressor??

Post by The_Doc » Tue Mar 14, 2023 8:41 pm

I like the look of this design.

User avatar
fuzzbuzzfuzz
Posts: 489
Joined: Thu Aug 23, 2018 11:25 am

Re: Thoughts on a good compressor??

Post by fuzzbuzzfuzz » Wed Mar 15, 2023 1:19 am

That's looking pretty sweet Laurie!

Could you talk us through each function? (for a simple layman here!)

Without throwing a proverbial spanner in any works....is it possible to allow the two channels to have independent EQing, OR as a work-around a small switch to add the "bright" or "Treble" to one channel?

(Similar to the BOSS CS-1 or the Janglebox mod to a Dynacomp).

Of course each owners usuage will be different. For me I envisage leaving the comp always on, at a relatviely light setting to tame spikes and add a bit of sustain and zing), then hit say Channel B for more squish and perhaps more treble...sort of "instant 60s". (Of course we wouldnt want to lose volume either*, possibly boost).

Cheers :D

User avatar
laurie
Posts: 1632
Joined: Fri Aug 17, 2018 2:07 am
Location: Canada
SBZ: Multi Platinum
Bossarea: Multi Platinum

Re: Thoughts on a good compressor??

Post by laurie » Wed Mar 15, 2023 1:32 am

fuzzbuzzfuzz wrote:
Wed Mar 15, 2023 1:19 am
That's looking pretty sweet Laurie!

Could you talk us through each function? (for a simple layman here!)

Without throwing a proverbial spanner in any works....is it possible to allow the two channels to have independent EQing, OR as a work-around a small switch to add the "bright" or "Treble" to one channel?

(Similar to the BOSS CS-1 or the Janglebox mod to a Dynacomp).

Of course each owners usuage will be different. For me I envisage leaving the comp always on, at a relatviely light setting to tame spikes and add a bit of sustain and zing), then hit say Channel B for more squish and perhaps more treble...sort of "instant 60s". (Of course we wouldnt want to lose volume either*, possibly boost).

Cheers :D
Knobs... all I see is knobs... so many knobs!

User avatar
laurie
Posts: 1632
Joined: Fri Aug 17, 2018 2:07 am
Location: Canada
SBZ: Multi Platinum
Bossarea: Multi Platinum

Re: Thoughts on a good compressor??

Post by laurie » Wed Mar 15, 2023 3:41 am

To meet those needs it would really have to be two complete compressors in one housing. That is starting to make things too complicated for the design and build. Somewhere between 12 and 16 knobs in a super large enclosure.

The design should have one simple compressor (without the A/B switching). And an external box can be made to enable two compressors to be setup to to be A and B. It sounds like a big rig (2 compressors and a switch box) but trying to do it all in one box would be too complicated and not much smaller.

And on the plus side, you would have two compressors that could be used for stereo, or in two separate rigs when you didn't need the A/B functionality.
Last edited by laurie on Wed Mar 15, 2023 4:25 am, edited 2 times in total.

User avatar
laurie
Posts: 1632
Joined: Fri Aug 17, 2018 2:07 am
Location: Canada
SBZ: Multi Platinum
Bossarea: Multi Platinum

Re: Thoughts on a good compressor??

Post by laurie » Wed Mar 15, 2023 4:19 am

Keeping it simple. Threshold, Attack and Release are trim-pots inside.
.
.
32Press mockup v2.jpg
32Press mockup v2.jpg (70.76 KiB) Viewed 3102 times

User avatar
laurie
Posts: 1632
Joined: Fri Aug 17, 2018 2:07 am
Location: Canada
SBZ: Multi Platinum
Bossarea: Multi Platinum

Re: Thoughts on a good compressor??

Post by laurie » Wed Mar 15, 2023 4:41 am

Leave both the compressors engaged. Disengaging/engaging the effect and selecting A or B is done in the external box.

The switch box could be used for any two effects... a pair of DS-1's with different settings? An overdrive and a distortion? Whatever you like...
.
.
32Press mockup v2a - DUAL.jpg
32Press mockup v2a - DUAL.jpg (68.29 KiB) Viewed 3099 times

Post Reply