Discuss all non-Boss pedals here!
-
Luke Drifter
- Posts: 189
- Joined: Wed Jan 09, 2019 2:27 am
- Location: West Australia
Post
by Luke Drifter » Thu Jul 14, 2022 12:11 pm
laurie wrote: ↑Sun Aug 08, 2021 9:25 pm
Old_Iron wrote: ↑Sun Aug 08, 2021 7:13 pm
Saw that Laurie used a 12V zenner diode in the power section, so... why not?
The 12V Zener limit is because the base-emitter reverse voltage limit of the MP16B transistors (when used as clippers) is 15V.
so, is it safe to run at 12v?
I'm really digging this 32OD
Its doing fuzz-taming duties on my new home board atm
Jerem, Jeremy on BAF and SBZ
-
laurie
- Posts: 1643
- Joined: Fri Aug 17, 2018 2:07 am
- Location: Canada
- SBZ: Multi Platinum
- Bossarea: Multi Platinum
Post
by laurie » Thu Jul 14, 2022 3:10 pm
DO NOT EXCEED 11 VDC.
If using an unregulated supply please measure it with a meter before use.
-
Luke Drifter
- Posts: 189
- Joined: Wed Jan 09, 2019 2:27 am
- Location: West Australia
Post
by Luke Drifter » Thu Jul 14, 2022 3:28 pm
Thank you
Jerem, Jeremy on BAF and SBZ