32 Pedals arrived! (Feedback post)

Discuss all non-Boss pedals here!
Luke Drifter
Posts: 189
Joined: Wed Jan 09, 2019 2:27 am
Location: West Australia

Re: 32 Pedals arrived! (Feedback post)

Post by Luke Drifter » Thu Jul 14, 2022 12:11 pm

laurie wrote:
Sun Aug 08, 2021 9:25 pm
Old_Iron wrote:
Sun Aug 08, 2021 7:13 pm
Saw that Laurie used a 12V zenner diode in the power section, so... why not? :twisted:
The 12V Zener limit is because the base-emitter reverse voltage limit of the MP16B transistors (when used as clippers) is 15V.
so, is it safe to run at 12v?
I'm really digging this 32OD
Its doing fuzz-taming duties on my new home board atm
Jerem, Jeremy on BAF and SBZ

User avatar
laurie
Posts: 1632
Joined: Fri Aug 17, 2018 2:07 am
Location: Canada
SBZ: Multi Platinum
Bossarea: Multi Platinum

Re: 32 Pedals arrived! (Feedback post)

Post by laurie » Thu Jul 14, 2022 3:10 pm

DO NOT EXCEED 11 VDC.

If using an unregulated supply please measure it with a meter before use.

Luke Drifter
Posts: 189
Joined: Wed Jan 09, 2019 2:27 am
Location: West Australia

Re: 32 Pedals arrived! (Feedback post)

Post by Luke Drifter » Thu Jul 14, 2022 3:28 pm

Thank you
Jerem, Jeremy on BAF and SBZ

Post Reply