BossAreaForum

I have had the same impulses to get the FDR-1 and moreso, the FBM-1. Same thing, though... The IR-2, as well as the Walrus ACS-1 and Behringer GDI21 have me flush with Bassman/Bassman adjacent models, plus the ACS-1 has a great Deluxe Reverb in it. I also agree that Pepe might as well complete the t...

Ordered the NotADumble. Will probably have it midweek and assembled about 20 minutes after that. The NotAKlon kit was fun and turned out to be a really good sounding pedal. Assuming the same with this one. I don't have a "Dumble" style overdrive, and the "A Box Later" clean mode will be fun to exper...

These tiny pedals are hilarious - and that they sound Ok too makes it twice as funny! SO TRUE! I have two EKOs and Trem. I had the Trem on a small board, but it wasn't quite right for how I use trem. Therefore, I replaced the small Trem with a EQD hummingbird and therefore had to swap out the long ...

Very cool!
I have the FRV1, it's an intense spring reverb!

Wow!
Looks great! Now sounds and works great for the next couple decades!

Nice! I guess this is a modification to reduce the hiss that appears when you turn some of the faders down , right? A friend told me that the GE-7 (and many other guitar EQs!) has that behaviour and that a modification was not the worst thing. Yes, it's a swap of all of the opamps and several caps ...

This might be something worth looking into.
I have found many amps have all 3 taps on the transformer, but only 2 connected to speaker jacks.
This could be a simple wire swap to get the 4 ohm load you desire..?

I have an October 2010 GE7 with the Monte Allums Plus Mod coming! Pedal is excellent condition, the mod done very well. Best part, the modified pedal was $6 more than just getting the mod kit shipped to me. Figured the $6 was well spent and my MIJ GE7 can stay stock!

Your amp has 2 or 3 speaker jacks? My DSL50 has 3: a single 16 ohm jack and a pair that services either a total load of 8 or 4 ohms, depending on the setting of the switch. * as you are already aware, two 8 ohm cabs in parallel is 4 ohms, so set the switch to 4 ohms, plug into those two jacks and ro...

Picked up an MXR M87 Bass Compressor, it was like new and a really good deal, so why not? I have a 90s era Trace Elliot SMX Dual Compressor (on the big bass board) and a LM2B (on the small bass board), but figured it wouldn't hurt to have a 'modern' bass comp that's not boarded. So far, it's really...